Supervise alarms
...................................................................................................................................................................................................................................
When to use
The following procedures cover the range of possible tasks that you may have to
perform on the ITM CIT in order to supervise the alarms. In the previous section, we
discussed the viewing of the current alarms. This was an operation involving one
single NE. In the supervision of alarms, it is possible to view the currently raised
alarms of more than one single local NE. Indeed, supervision of alarms on the 1643
AM or 1643 AMS involves the monitoring of alarms on more than one alarm, locally
and remotely.
Related information
The items below list other relevant information to this procedure:
• There is no related procedures to the supervision of alarms.
• Concepts of Event Management.
Before you begin
The items below gives information on tasks to perform before beginning the procedure:
• A NE must be listed and subscribed to the Supervision list, in order to see if there
is or not presence of raised alarms on that NE.
• No precaution is needed when performing this procedure.
View alarm supervision list
Folow this procedure to view the list of subscribed and unsubscribed NE.
...................................................................................................................................................................................................
1
Select Alarms-> Alarm Supervision.
Result: The Alarm Supervision window appears.
...................................................................................................................................................................................................
2
Verify that the desired NE is listed and subscribed.
...................................................................................................................................................................................................
3
If the network element is Then
Not listed, nor subscribed Go to Adding NE to Supervision list, and
Subscribing NE to the Supervision list.
Listed, but not subscribed Go to Subscribing NE to the Supervision List.
Listed and subscribed Go to step 5**
...................................................................................................................................................................................................
4
Click Close.
Alarm management
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
6-63
To Next Page
Loading...
