Alcatel-Lucent 1643 AMS - 4 Management communication setup; Overview

4 4Management communication
setup
Overview
...................................................................................................................................................................................................................................
Purpose
The purpose of management communication setup is to provision the Data
Communication Network (DCN) parameters for a network element.
Objective
The objective of provisioning the DCN parameters is to optimize the communication
between network elements and the management system.
Outcome
An optimized DCN in which the exchange of routing data is minimized with full
management of NEs.
Intended use
This chapter explains the concepts of provisioning the DCN. After the concepts the
procedures used for DCN Management are described.
Contents
Concepts 4-3
Basic DCN principles 4-4
DCN configurations 4-7
DCN addresses 4-11
NSAP address format 4-12
Data communication channels 4-15
Dual stack with tunneling (DSwT) 4-18
Example of dual stack with tunneling 4-23
DSwT tunnel auto provisioning (TAP) 4-26
DSwT connecting areas with manual TAP tunnels 4-27
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-1