Partition repair 4-28
Partition repair guidelines 4-30
Configuring a Data Communication Network (DCN) 4-33
Create new or modify existing DCC terminations 4-34
Provisioning DCN information 4-36
Parameters for provisioning DCN information 4-38
Managing the DCC 4-41
Parameters for managing the DCC 4-43
Creating a transparent DCC cross-connection 4-44
Procedures regarding login into remote NEs 4-46
Adding a remote accessible NE to the configured nodes list 4-47
Editing remote NEs in the configured nodes list 4-49
Parameters for adding and editing remote logins in the configured nodes
list
4-51
Remote login via configured nodes list 4-52
Remote login via neighbors option 4-54
Remote login via Area option 4-56
Provision NE tunnel information 4-58
Editing provisioned IP parameters 4-59
Adding manual route 4-60
Editing local/manual route 4-61
Editing TAP properties 4-62
Parameters for provisioning NE tunnel information 4-64
Provision SNMP management 4-67
Provision SNMP management 4-68
Management communication setup
Overview
....................................................................................................................................................................................................................................
4-2
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
