Alcatel-Lucent 1643 AMS - Local Alarms Signaling

To Next Page

To Previous Page

Local alarms signaling

...................................................................................................................................................................................................................................

Introduction

This is the default mode on the 1643 AM or 1643 AMS.

The MDOs behavior in this mode:

• MDO-2 is active when one or more local alarms (including possible MDI alarms)

with severity PROMPT are raised

• MDO-3 is active when one or more local alarms (including possible MDI alarms)

with severity DEFERRED are raised

• MDO-4 is active when one or more local alarms (including possible MDI alarms)

with severity INFO are raised.

Example

This mode is fine for the following application:

Equipment provisioning

5-12

Alcatel-Lucent - Proprietary

See notice on first page

365-312-807R7.2

Issue 4, May 2007

Main Page

Alcatel-Lucent 1643 AMS - Local Alarms Signaling

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS