EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - Parameters for Switching SNC Protection

Alcatel-Lucent 1643 AMS
724 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters for switching SNC protection
...................................................................................................................................................................................................................................
Switch mode
Switch Mode displays the Non-Revertive mode. In the Non-Revertive mode the traffic
switches to the protected line and remains even when the failure is solved.
Hold of time
The delay between the moment that the signal fail or degrade condition is set, and the
start of the execution of the switch-over. The default value is 0.0 seconds. Values are
0.0 ... 9.9.
Switch Request
The Switch Request descriptions and values are:
Description Values
No change is made to the current state of the protection
switch
No Request
Executing Clear on a line will undo only the previous
switch request that are initiated on that specific line.
Clear
Will switch the traffic to the working regardless of the
state of that leg. This will override a hardware protection
switch. This is canceled with the clear command.
Forced To Working
Will switch the traffic to the protection regardless of the
state of that leg. This will override a hardware protection
switch. This is canceled with the clear command.
Forced To Protection
Will switch traffic to the working only when that working
is error free and is not satisfying an equal or higher
priority request. A hardware protection switch will
override.
Manual To Working
Will switch traffic to the protection only when that
protection is error free and is not satisfying an equal or
higher priority request. A hardware protection switch will
override.
Manual To Protection
Prevents usage of the protection route for any protection
switching activity. This is canceled with the clear
command.
Lockout
Traffic maintenance
...................................................................................................................................................................................................................................
9-26
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS