Alcatel-Lucent 1643 AMS - Parameters for Changing the Inactivity Time

Parameters for changing the inactivity time
...................................................................................................................................................................................................................................
Lock state
Specifies whether the user is locked. The value is either locked or unlocked.
Capability
This field lists the user roles. The possible values are described in the table below:
Capability Description
Admin The user can perform all ITM-CIT administration tasks and configure
a network element.
Config The user can perform all transmission related tasks and retrieve and
edit all network element related data.
View The user can only view the network element configuration, it cannot
be altered.
Inactivity time
Defines after which time the workstation will be locked if the user is inactive. The
value is an integer between 0 and 60. If the value is 0, the user will never be logged
out.
Security administration
...................................................................................................................................................................................................................................
3-10
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007