Alcatel-Lucent 1643 AMS - Parameters for ASAP Assignment

Parameters for “ASAP Assignment”
...................................................................................................................................................................................................................................
Parameters in the ASAP list
The following table shows the data which are shown in the ASAP List part of the
window.
Information field Meaning
ASAP Name
Displays the Alarm Severity Assignment Profiles Name
ASAP Type Displays the Alarm Severity Assignment Profiles Type
Fields and parameters in the Instance List
The following table shows the fields which can be used to select manageable objects in
the left part of the
Instance List area.
Information field Meaning
Instance Type
List the selected Instance Type
Slot List the slot
Port List the port number of the selected ASAP.
AU List the AU4 number of the selected ASAP
TU List the TU12 number of the selected ASAP
Timing Source
Virtual Switch ID
List the virtual switch ID of the selected Instance
Service Route ID The service route ID of the selected Instance.
Buttons and Actions
The following options are available:
Button Function
> Adds a completely selected instance to the list in the right
part of the
Instance List area.
> Deletes a selected instance from the list in the right part of
the
Instance List area.
OK The selected ASAP is assigned to the selected Managed
Objects.
Cancel Closes the window.
Alarm management
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
6-45