Viewing or editing MDO information
...................................................................................................................................................................................................................................
When to use
Follow these steps to view and edit MDO names and statuses.
Related information
For related information refer to:
• “View and Edit MDI Information”
“Parameters for viewing or editing MDO information” (p. 5-58).
Before you begin
Before performing this procedure make sure that:
• the miscellaneous discrete input are physically connected to the NE.
The following precaution should be noted:
• The MDO name can be no longer than 26 characters.
• It is only possible to have four MDOs per network element.
• The user should select names for the Miscellaneous Discrete Outputs that are both
well-chosen and unique.
Procedure
Follow these steps to view or edit MDO names and statuses.
...................................................................................................................................................................................................
1
Select Provisioning → Equipment → MDO.
Result: The Provisioned MDO window appears.
...................................................................................................................................................................................................
2
Select an MDO from the list under Id and Name.
Result: The appropriate MDO is selected.
...................................................................................................................................................................................................
3
Click Edit.
Result: The Edit Provisioned MDO window is displayed. The current name of the
selected MDO is displayed on the name line of this window.
...................................................................................................................................................................................................
4
Enter or change the Name (max. 26 characters).
...................................................................................................................................................................................................
5
Set the Status of the MDO to Active (closed loop), Inactive (open loop).
Equipment provisioning
...................................................................................................................................................................................................................................
5-56
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
