Retrieving historical data
...................................................................................................................................................................................................................................
When to use
Follow these steps to view details about alarms that have cleared and moved to the
history bin.
Related information
Parameters used in this procedure can be found at “Parameters for retrieving historical
data” (p. 6-77).
Before you begin
The items below gives information on tasks to perform before beginning the procedure:
• No prerequisites are needed when performing this procedure.
• No precaution is needed when performing this procedure.
Display the history alarms list
Follow this procedure to display the history of all alarms.
...................................................................................................................................................................................................
1
Select Alarms -> History Alarms.
Result: History Alarms window appears and displays a list of cleared and raised
alarms in the History log of the network element.
...................................................................................................................................................................................................
2
Select an alarm from the alarms list and click Details...
Result: The History/Current Alarm Details window appears.
...................................................................................................................................................................................................
3
Click Close to return to the History window.
Set up filters
Follow this procedure to implement filters in the History window.
...................................................................................................................................................................................................
1
Select Alarms -> History Alarms.
Result: History Alarms window appears.
...................................................................................................................................................................................................
2
Mark the Filtering checkbox and click Filter...
Alarm management
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
6-75
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
