Edit the VC 12 termination point information list
...................................................................................................................................................................................................................................
When to use
To edit the VC 12 termination point information for the SHDSL
Related information
No related information is available.
Before you begin
No prerequisites or precautions are needed when performing this procedure.
Procedure
...................................................................................................................................................................................................
1
Select Provisioning —> SHDSL —> Connection/NTU
Result: The SHDSL Connection List window is displayed.
...................................................................................................................................................................................................
2
Select one SHDSL connection from the list.
...................................................................................................................................................................................................
3
Click VC12 Termination
Result: The VC12 Termination Point Information window is displayed.
...................................................................................................................................................................................................
4
Click Edit.
Result: The Edit VC12 Termination Point Information window is displayed.
...................................................................................................................................................................................................
5
Select the TI mode.
...................................................................................................................................................................................................
6
Set the API which to be expected.
...................................................................................................................................................................................................
7
Select the API display mode
...................................................................................................................................................................................................
8
Select the TIM detection
...................................................................................................................................................................................................
9
Click OK to commit changes to the NE and close the window.
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-179
To Next Page
Loading...
