Switching SNC protection
...................................................................................................................................................................................................................................
When to use
The purpose of these steps is to switch lines:
This switch should be requested when a number of specific paths has to be rerouted
due to maintenance activities.
Related information
Related precautions and prerequisites are:
• A protection switch is always traffic affecting.
• An SNC path should have been provisioned.
• procedures to set cross connections and their protection.
Before you begin
Set cross connections and their protection.
Procedures
...................................................................................................................................................................................................
1
Select Protection -> Transmission -> SNC.
Result: The SNC Protected TP Filter window is displayed.
...................................................................................................................................................................................................
2
Make a selection and click OK.
Result: The Provisioned NE SNC Protection Information window is displayed.
...................................................................................................................................................................................................
3
Make a selection from the list and click Switch.
Result: The Switch Provisioned NE SNC Protection Information window is
displayed.
...................................................................................................................................................................................................
4
Make a selection for the Switch Request with usage of the above parameter information
and click
OK.
Result: The switch window closes and the information window is re-displayed.
...................................................................................................................................................................................................
5
Click Close to exit.
Result: The window closes.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic maintenance
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
9-25
To Next Page
Loading...
