1 1Safety
Overview
...................................................................................................................................................................................................................................
Purpose
The aim of this chapter on safety is to provide users of 1643 AM and 1643 AMS
systems with the relevant information and safety guidelines to safeguard against
personal injury. Furthermore, this chapter may be useful to prevent material damage to
the equipment.
The present chapter on safety must be read by the responsible technical personnel
before carrying out relevant work on the system. The valid version of this document
must always be kept close to the equipment.
Potential sources of danger
The 1643 AM and 1643 AMS equipment has been developed in line with the present
state-of-the-art and fulfills the current national and international safety requirements. It
is provided with a high degree of operational safety resulting from many years of
development experience and continuous stringent quality checks in our company.
The equipment is safe in normal operation. There are, however, some potential sources
of danger that cannot be completely eliminated. In particular, these arise during the:
• opening of housings or equipment covers,
• manipulation of any kind within the equipment, even if it has been disconnected
from the power supply,
• disconnection of optical or electrical connections,
through possible contact with the following:
• live parts,
• laser light,
• hot surfaces, or
• sharp edges
Contents
General notes on safety 1-3
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-1
To Next Page
Loading...
