EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - Provisioning a Virtual Switch in Spanning Tree Mode

Alcatel-Lucent 1643 AMS
724 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Provisioning a virtual switch in spanning tree mode
...................................................................................................................................................................................................................................
When to use
To route Ethernet packets from different customers which are using the same physical
LAN port to more than one WAN port.
The Provisioning a virtual switch in spanning tree mode procedure is also applicable to
X5IP.
Related information
Related procedures and information are:
“Provisioning Ethernet services” (p. 8-98).
“Parameters for provisioning a LAN unit in repeater mode” (p. 8-114)
“Ethernet over SDH” (p. 8-24).
Before you begin
Before provisioning a virtual switch determine and check the following:
the tagging mode of the LAN unit is set to IEEE802. 1Q / IEEE 802.1ad
the virtual switch name and label
the LAN port name, label and members
the WAN port label and members
the LAN and WAN port details information
the Rate Control of the Virtual Switch (QoS Oversubscription enable or disable)
for QoS provisioning of the LAN port, the traffic class assignment, the operation
mode (strict policy or over subscription, the CIR, the scheduler method and weight.
for QoS provisioning of the WAN port, the traffic class assignment, the scheduler
method and weight.
deleting a virtual switch will detach all the associated LAN ports or WAN ports. If
these ports carry traffic, this traffic will be lost
the Traffic Class Assignment and LAN and WAN port number
for QoS provisioning of the LAN port, the Traffic Class Assignment, the
Forwarding Class and CIR
for QoS provisioning of the WAN port, the type of policy for the selected queue
and weight.
detaching a LAN port or a WAN port can disrupt traffic over these ports
For provisioning a virtual switch in the Spanning Tree mode the following must be
performed:
create a virtual switch
provision LAN and WAN port details
provision the TUG structure and create cross connections between the WAN ports
<-> CC <-> line ports
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-105

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS