Result: The Add Virtual Switch window appears.
...................................................................................................................................................................................................
3
Enter a name of maximum 20 characters in the Virtual Switch Label field (for
example Sales).
...................................................................................................................................................................................................
4
Select Repeater in the Operation mode area.
...................................................................................................................................................................................................
5
In the group box Available Port List select one LAN port.
Click on the
< button to attach the selected LAN port to the virtual switch.
Result: The selected LAN port appears in the Selected Port Membership group
box.
...................................................................................................................................................................................................
6
In the group box Available Port List select one WAN port.
Click on the
< button to attach the selected WAN port to the virtual switch.
Result: The selected WAN port appears in the Selected Port Membership group
box.
...................................................................................................................................................................................................
7
Click OK
Result:
A new Virtual Switch has been created.
The
Virtual Switch Information window is updated displaying the created Virtual
Switch..
...................................................................................................................................................................................................
8
Click OK.
Result:
The Virtual Switch Information window is closed.
Provision WAN port configuration details
No procedures have to be performed to provision the WAN port configuration details
when the operation mode of the Virtual Switch is configured in the Repeater mode.
Provision TUG structure and cross connections
For provisioning the TUG structure and Cross Connections reference is made to:
• “Provision cross connections without protection” (p. 8-147)
Traffic provisioning
Provisioning a virtual switch in repeater (promiscuous)
mode
....................................................................................................................................................................................................................................
8-104
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
