Set up filters
...................................................................................................................................................................................................................................
When to use
The procedures of this section can be used to implement display filters for the History
Alarm list and Current Alarm list
Related information
The following items list other relevant information to this procedure:
• There is no related procedure;
• Related concepts are described in the Concepts of Event Management.
Before you begin
The items below gives information on tasks to perform before beginning the procedure:
• No prerequisite must be met in order to view the alarm lists;
• No precaution are needed when performing this procedure.
Set up filters on the current alarm list
...................................................................................................................................................................................................
1
Select Alarms → Current Alarms or select Provisioning → Equipment → Shelf
Display
, right-click on a slot or a unit and select Alarms from the pop-up menu.
Result: The Current Alarms window appears.
...................................................................................................................................................................................................
2
Mark the Filtering check box.
Result: The alarm filtering functionality is enabled.
...................................................................................................................................................................................................
3
Click Filter...
Result: The Alarm List Filter Configuration window appears.
...................................................................................................................................................................................................
4
Select your filter options and click OK.
Result: The Alarm List Filter Configuration window disappears. The filters are
applied against the display on the Current Alarms window.
E ND OF STEPS
...................................................................................................................................................................................................
Alarm management
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
6-17
To Next Page
Loading...
