View alarm details
...................................................................................................................................................................................................................................
When to use
The procedures of this section can be used to view additional information about an
alarm.
Related information
The following items list other relevant information to this procedure:
• There is no related procedure;
• Related concepts are described in the Concepts of Event Management.
Before you begin
The items below gives information on tasks to perform before beginning the procedure:
• No prerequisite must be met in order to view the alarm lists;
• No precaution are needed when performing this procedure.
View alarm details
...................................................................................................................................................................................................
1
Select Alarms → Current Alarms or select Provisioning → Equipment → Shelf
Display
, right-click on a slot or a unit and select Alarms from the pop-up menu.
Result: The Current Alarm window appears.
...................................................................................................................................................................................................
2
Select an alarm from the list and click Details....
Result: The Current Alarms Details window appears. Full details about the
selected alarm is displayed.
...................................................................................................................................................................................................
3
Click on Previous or Next to see the details of another alarm. Otherwise go to step 4.
Result: The Current Alarm Details presents the results of the navigating through
the alarms list, above and below the selected alarm.
...................................................................................................................................................................................................
4
Click on Close.
Result: Current Alarm Details window closes and the Current Alarms window
appears.
...................................................................................................................................................................................................
5
Click on Close.
Alarm management
...................................................................................................................................................................................................................................
6-20
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
