Timing configuration
...................................................................................................................................................................................................................................
Timing functions
Timing functions of the network element can be divided into three main functionalities.
These three functionalities correspond to the three main windows for timing
management.
To provision the network element timing, all these functionalities must be addressed.
Block functionality
The table below indicates the actions that can be performed in the procedures
addressing the three functionalities.
Functionality Action
Timing Sources Input port timing process
Timing source assignment
Timing source functions
System Timing System timing link switch
System clock processes
Output port timing process
Station Clock Output
Timing
Output clock timing link switch
Station clock output selection
Station clock output process
Station clock output distribution functions
Functional diagram
The following diagram indicates the three main functionalities.
Timing provisioning
...................................................................................................................................................................................................................................
7-16
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
