Alcatel-Lucent 1643 AMS - Provision cross connections without protection

Provision cross connections without protection
Overview
...................................................................................................................................................................................................................................
Purpose
To provide traffic over the network all cross connections must be provisioned. The
cross-connection settings can be modified if the traffic demand changes. The following
changes can be made:
• add a new cross-connection or add a leg to an existing cross-connection
• delete a cross-connection.
Contents
Creating cross connections without protection 8-148
Deleting cross connections 8-150
Parameters for provisioning cross connections without protection 8-151
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-147