Deleting cross connections
...................................................................................................................................................................................................................................
When to use
When a new traffic plan is implemented or the existing traffic plan is changed use this
procedure to delete cross connections.
Related information
Precautions:
• Before deleting a cross-connection or part of a cross-connection be sure to know
whether the cross-connection to be removed still carries traffic? If yes this traffic
will be lost after removing the cross-connection
• Deleting or changing a cross-connection is traffic affecting if the current existing
cross-connection is carrying traffic
Procedures
Use the following procedure to delete an existing cross-connection. This procedure can
be used to delete any cross connections.
...................................................................................................................................................................................................
1
Select Provisioning -> Transport -> Cross Connection.
Result: The Cross Connection Filter window appears.
...................................................................................................................................................................................................
2
Select the filter Cross Connection Type, Capacity, Directionality, TP, Slot, Port, and the
AU4 number and select
OK.
Result: The Cross Connection Selection List window appears with all available
cross connections that meet the selected filter criteria. The filter criteria are
displayed in the filter area of the Cross Connection Selection List window.
...................................................................................................................................................................................................
3
Select the cross-connection to be deleted from the list and select Delete in the CC
area.
Result: A confirmation window appears.
...................................................................................................................................................................................................
4
Click Yes to confirm the removal of the cross-connection.
Result: The cross-connection is removed. The cross-connection disappears from the
list in the Cross Connection List window.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
...................................................................................................................................................................................................................................
8-150
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
