Result: The parameters needed to establish a remote login are filled in.
...................................................................................................................................................................................................
5
Click OK.
Result: The information is stored and the Add Accessible Network Element window
disappears.
...................................................................................................................................................................................................
6
The NE login window appears.
Result: The remote login on specified network element is now possible by
selecting the network element from the lower part of the configured nodes list.
...................................................................................................................................................................................................
7
Click Close to finish the activities in this window.
E ND OF STEPS
...................................................................................................................................................................................................
Management communication setup
Adding a remote accessible NE to the configured nodes
list
....................................................................................................................................................................................................................................
4-48
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
