Result: The Assign NE Units to Slots window appears with information
concerning the selected slot and its associated slots.
...................................................................................................................................................................................................
3
Right-click on a slot or a unit and select Assign/Unassign.
Result: The Assign NE Units to Slots window appears with information
concerning the selected slot and its associated slots.
...................................................................................................................................................................................................
4
Select the desired operation from the selections at the top of the window.
...................................................................................................................................................................................................
5
If assigning units, use the pull-down menu for Main Unit and select the correct unit
corresponding to the displayed slot.
Result: The correct unit appears as the new Main Unit/Interface.
...................................................................................................................................................................................................
6
Click OK.
Important! When assigning units during node creation, instead of the Provisioned
NE Components window, the window Node Creation - Provision Slots will
reappear.
Result: The desired operation for this slot is performed, and the window
Provisioned NE Components or Node Creation - Provisioned Slots appears again.
...................................................................................................................................................................................................
7
If creating a node, then click Finish. Otherwise, click Cancel.
Result: The window Provisioned NE Components (or in the case of node creation,
Node Creation - Provisioned Slots) disappears.
E ND OF STEPS
...................................................................................................................................................................................................
Equipment provisioning
Provisioning slots
....................................................................................................................................................................................................................................
5-22
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
