Management state
The state of the association with the management system is displayed. The possible
states are given in the following table.
Management State Description
Normal Normal will be displayed whenever management operations
have been completed. In other words, the management system
has completed the MIB upload, MIB download, MIB
resynchronization, or reevaluation of fault status. The state can
also be Normal when the association between the
ITM-SC/ITM—CIT and the NE has been lost.
Uploading The management system is performing an MIB upload.
Resyncing If the MIB of the NE and the MIB image on the management
system are out of synchronization, then the management
system invokes a resynchronization. The management state
shows the progress of the operation. If executed properly, it
should display, in order: Normal, Resyncing, Normal,
ReEvaluatingFaultStatus, Normal.
ReEvaluating
FaultStatus
After a resynchronization, the management system initiates a
reevaluate fault status operation.
Downloading A MIB download has been started by the management system.
The management state is set to Normal during the downloading
process. If the MIB download is in progress when a loss of
association occurs, then the management state will remain
Downloading.
EMS connection state
Indicates whether an active connection (CMISE association) exist to the element
manager (ITM-SC).
Equipment provisioning
Parameters for confirming the MIB
....................................................................................................................................................................................................................................
5-28
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
