Ethernet port parameters
The following Ethernet port parameters can be set when the auto-negotiation is
disabled:
• port speed; set to 10 Mbit/s or 100 Mbit/s
• duplex mode; set to half duplex or full duplex
• pause mode; this function can be set to enabled or disabled only when the duplex
mode is full duplex.
Equipment provisioning
Parameters for Port Provisioning
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
5-65
To Next Page
Loading...
