Edit the information of an existing NE
Follow this procedure to modify some of the NE information
...................................................................................................................................................................................................
1
Select Alarms --> Alarm Subscription.
Result: The Alarm Subscription window appears.
...................................................................................................................................................................................................
2
Select a network element from the list.
...................................................................................................................................................................................................
3
Click “Edit” (p. 6-69).
Result: The Supervision: Edit network element Information window appears.
...................................................................................................................................................................................................
4
Enter your changes to the “NE name” (p. 6-71) and/or “Comment” (p. 6-69).
...................................................................................................................................................................................................
5
Enter your “Password” (p. 6-71).
...................................................................................................................................................................................................
6
Confirm your password.
The Password and Confirm Password fields should match since a validation will
occur to ensure integrity.
...................................................................................................................................................................................................
7
Click OK
Result: You will be prompted to save your changes with the Save As...window.
These changes are stored into the supervision log file on the system controller of
the NE, and on the ITM CIT. The Supervision: Edit network element Information
window is closed and the originating window is updated.
E ND OF STEPS
...................................................................................................................................................................................................
Alarm management
Supervise alarms
....................................................................................................................................................................................................................................
6-68
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
