Info
Informs you if there is, or not, Info type alarm(s) that were raised. Info alarms, by
definition, are maintenance information and no maintenance action is required at this
node. Red circle indicates the presence of alarms. Green circle indicates its absence.
The circle is empty if the network element has network elementver been subscribed.
The status column would then read “-”.
Deferred
Informs you if there is, or not, Deferred—type alarm(s) that were raised. Deferred
alarms, by definition, require maintenance action but may be deferred because no
primary system service is being affected. Red circle indicates the presence of alarms.
Green circle indicates its absence. The circle is empty if the network element has never
been subscribed. The status column would then read “-”. The default sorting order is
red circle, green circle, <empty>, or reverse.
Failure description
Displays the reason of the subscription process failure for the network element with
status “-” (unsubscribed).
Help
The help-on alarms file gives additional information on the alarms and how to deal
with the related problem. This help-file contains the same information as present in the
“Alarm Messages and Trouble-Clearing Guide”.
Info
Informs you if there is, or not, Information alarm(s) raised on that network element.
Red circle indicates the presence of alarms. Green circle indicates its absence. The
field is empty if the NE has never been subscribed. The default sorting order is red
circle, green circle, <empty>, or reverse.
Load
Allows to open a previously saved supervision file. This button brings up the “Open”
window where a previously saved supervision file can be selected from a proposed list.
If the list contents had been changed, you will be prompted to save the list before
repopulation. Then the list shall then be cleared and repopulate with the new
Supervision file data.
Login
Allows to remotely login into the selected network element. This button shall only be
sensitive when a network element of the remote login IDs has been selected, and a
local session does exist. Otherwise, this button shall be greyed out.
Alarm management
Parameters for supervising alarm
....................................................................................................................................................................................................................................
6-70
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
