Alcatel-Lucent 1643 AMS - Page 332

...................................................................................................................................................................................................
4
Click OK to confirm the current settings.
Result: The Edit Automatic Selection Criterions for NE System Timing window
disappears.
...................................................................................................................................................................................................
5
To provision another Timing Source go to step 2, otherwise go to step 6.
...................................................................................................................................................................................................
6
Click Close
Result: The Provisioned NE System Timing Information window disappears.
Set timing mode and QL mode
To set the Timing Mode and the QL Mode for a timing source follow this procedure:
...................................................................................................................................................................................................
1
Select Provisioning --> Timing --> System Timing.
Result: The Provisioned NE System Timing Information window appears.
...................................................................................................................................................................................................
2
Click Edit in the System QL field.
Result: The Edit QL Mode window appears.
...................................................................................................................................................................................................
3
Set the QL Mode to Enabled or Disabled.
...................................................................................................................................................................................................
4
Click OK to confirm the current settings.
Result: The Edit QL Mode window disappears.
...................................................................................................................................................................................................
5
Click Edit in the Timing Mode field.
Result: The Select Timing Mode window appears.
...................................................................................................................................................................................................
6
Set the Timing Mode to Free Running , Holdover,orLocked.
...................................................................................................................................................................................................
7
Click OK to confirm the current settings.
Result: The Select Timing Mode window disappears.
...................................................................................................................................................................................................
8
Click Close
Timing provisioning Provisioning system timing
....................................................................................................................................................................................................................................
7-30
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................