• Identify path channels within the line connections between network elements: first
check which channels are available.
Example: Between network elements A and B: #1.153, between network elements
B and C: #1.111 etc. (#1 is AU-4 number 1). A ring with 1643 AM or 1643 AMS
network elements is only possible on STM-1 level, therefore only #1 is available
• Identify network elements in which add-drop cross connections should be
established. These are the terminating network elements of the transmission path.
• Identify terminating ports. First check which ports are available.
Example: TP2.1 in network element A and TP1.2 in network element D.
• Identify the network elements in which through connections should be established
(in between terminating network elements).
Example: network element C.
Traffic provisioning
Transmission Plan
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-7
To Next Page
Loading...
