Depending on the mode of operation, queue 3 or queue 4 is used for network
management traffic, for instance for the spanning tree protocol (see “Traffic class to
queue assignment” (p. 8-90)). Hindering this traffic can influence Ethernet network
stability.
Default settings
These are the default settings of the queue scheduling method and weight:
Queue Queue scheduling method Weight
1 Strict priority 1
2 Strict priority 2
3 Strict priority 3
4 Strict priority 239
Traffic provisioning
Classification, queueing, and scheduling
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-93
To Next Page
Loading...
