Alcatel-Lucent 1643 AMS - Page 451

Result: The correct unit appears as the new Main Unit/Interface.
...................................................................................................................................................................................................
5
Click on OK.
Result: The desired operation for this slot is performed, and the window
Provisioned NE Components appears again.
...................................................................................................................................................................................................
6
Click Close.
Result: The window Provisioned NE Components disappears.
...................................................................................................................................................................................................
7
From the ITM CIT main menu, select Provisioning → LAN Management → LAN
Unit
Result:
The LAN Unit Information window opens.
...................................................................................................................................................................................................
8
Using the Slot drop-down list box select the respective Ethernet card.
Result: The LAN Unit Information window is now populated with information for
this unit.
...................................................................................................................................................................................................
9
To select the tagging mode to be used for this unit click on Edit
Traffic provisioning Provisioning Ethernet services
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-99