Virtual switch label
The label given to the Virtual Switch by the user when the Virtual Switch was created
via the “Create/Edit Virtual Switch” screen. The label is a character string up to 20
characters long (for example Sales).
VCG name
The name of the VCG associated with the WAN port is fixed: VCG2.x, where VCG2
refers to the slot and x is the number of the VCG. This is the same number as the
WAN port associated to the VCGl.
WAN port name
The WAN Port name is a fixed name: WAN2.x, where WAN2 refers to the slot and x
is the number of the WAN port. The number of the WAN Port can be 1 up to 4.
WAN port members
WAN ports associated with the selected Virtual Switch.
WAN port egress QoS
The following parameters for LAN port engress QoS can be set:
• Scheduler Method (weighted bandwidth or strict priority)
• Weight
LAN port information details
This table gives an overview of the LAN port information details which, depending on
the Virtual Switch mode, must be provisioned.
Repeater LAN Interconnect LAN VPN
Port x x x
Label x x x
CID x x
CIR x
Default User Priority
Mode x
WAN port information details
This table gives an overview of the WAN port information details which, depending on
the Virtual Switch mode, must be provisioned.
Repeater LAN Interconnect LAN VPN
Traffic provisioning
Parameters for provisioning a LAN unit in repeater mode
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-115
To Next Page
Loading...
