QOS_CQS - LAN port ingress QoS
The following parameters for LAN port ingress QoS can be set:
• Traffic Class Assignment (mapping table or default over riding)
• CIR
• Mode of Operation (strict policing or over subscription)
QOS_CQS - LAN port egress QoS
The following parameters for LAN port engress QoS can be set:
• Scheduler Method (weighted bandwidth or strict priority)
• Weight
LAN port label
The label given to the LAN Port by the user. The label is a character string up to 20
characters long.
LAN members
LAN Ports associated with the selected Virtual Switch.
PVID (WAN port)
Displays the port VLAN ID of the selected WAN port. PVID = 1...4093. The default
VLAN number used for untagged packets (= 4094).
Rate control mode
The Rate Control Mode is displayed. The value will be the current mode of an existing
Virtual Switch or to None for a new virtual switch.
STP
Spanning Tree Protocol Parameter.
STP bridge priority
The bridge priority of the Virtual Switch, the Virtual switch with the lowest value is
elected the ‘root bridge’. An integer 0...65535.
STP root bridge address
The MAC address of the Virtual Switch which is the Root Bridge.
STP root bridge priority
The Virtual switch with the lowest bridge priority value is elected the ‘root bridge’. An
integer 0...65535.
Traffic provisioning
Parameters for provisioning LAN unit in spanning tree
mode
....................................................................................................................................................................................................................................
8-118
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
