Parameters for provisioning Flow Identification Tables
...................................................................................................................................................................................................................................
Overview
The system allows you to create, edit, and delete FITs per port. The concept of the
Flow Identification Tables is described in “Quality of Service provisioning” (p. 8-94).
The FIT contains a restricted number of lines. Each line can contain a pair of one Flow
Descriptor (FD) and 1 QoS_Profile (refer to “Parameters for provisioning a QoS
profile” (p. 8-131)).
Example:
Insert Flow Group screen
The Flow Descriptor (FD) and QoS_Profile are created, edited via specific screens, the
Insert Flow Group screen and the Edit Flow Group screen
Virtual Port Descriptor (VPD) / Flow Identification Table
The major identifier of a FIT is the Virtual port descriptor (VPD). For each FIT
assigned to a port, the system allows you to provision exactly one virtual port
descriptor (VPD).
The VPD consists of S-VID and S-UP, which will be entered as follows:
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-141
To Next Page
Loading...
