Edit the QoS egress details
...................................................................................................................................................................................................................................
Related information
Refer to “Classification, queueing, and scheduling” (p. 8-85).
Procedure
Complete the following steps to edit the details of a LAN / WAN port egress QoS
...................................................................................................................................................................................................
1
Select Provisioning → LAN Management → Virtual Switch
Result:
The Virtual Switch Information window is displayed.
The information regarding QoS Egress is displayed in the QoS
Egress Queue
information field.
...................................................................................................................................................................................................
2
Select one egress queue and click on Edit{.
Result: The Edit Egress Queue Information window is displayed.
...................................................................................................................................................................................................
3
Use the radio buttons (Weighted Bandwidth and Strict Priority) to select the scheduler
method and click on
OK.
...................................................................................................................................................................................................
4
To modify the value for the modified weight enter the desired value in the field on the
left bottom of the screen and then click on the button with the
> (right arrow) symbol.
...................................................................................................................................................................................................
5
Click on OK.
Result: A Service affecting Warning Screen is displayed.
...................................................................................................................................................................................................
6
Click on Yes.
Result: The Virtual Switch Information window is displayed again.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-145
To Next Page
Loading...
