Routing information base and LSPs
Each RIB comprises a number of tables. These tables contain information on Network
Service Access Point (NSAP) addresses of nodes in the network and ports of the IS
through which these nodes can be reached. Intermediate Systems exchange routing
information regularly with one another as part of the IS-IS protocol by the use of Link
State Protocol Data Units (LSPs).
The LSPs contain the information on the NSAP addresses of nodes used in the tables
of the RIBs.
Management communication setup
Basic DCN principles
....................................................................................................................................................................................................................................
4-6
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007