EasyManua.ls Logo

Alcatel-Lucent 7450 - Getting Started; About this Guide; In this Chapter; Router Configuration Process

Alcatel-Lucent 7450
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Router Configuration Guide 11
Getting Started
About This Guide
This guide describes logical IP routing interfaces, virtual routers, IP and MAC-based
filtering, and cflowd support and presents configuration and implementation examples.
This guide is organized into functional chapters and provides concepts and descriptions of the
implementation flow, as well as Command Line Interface (CLI) syntax and command usage.
Unless otherwise specified, the topics and commands described in this document apply to the:
7450 ESS
7750 SR
7950 XRS
7450 ESS applicability statements refer to the 7450 ESS when it is not running in mixed
mode. 7750 SR applicability statements refer to the 7750 SR-7/12, 7750 SR-12e, 7750 SRa4/
a8 and 7750 SR-e1/e2/e3 platforms unless otherwise specified.
Command outputs shown in this guide are examples only; actual displays may differ
depending on supported functionality and user configuration.
In This Chapter
This chapter provides process flow information to configure routing entities, virtual routers,
IP and MAC filters, and Cflowd.
Router Configuration Process
Table 1 lists the tasks necessary to configure logical IP routing interfaces, virtual routers, IP
and MAC-based filtering, and Cflowd.

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals