Alcatel-Lucent 7450 - Applying Filter Policies

Filter Policies
Router Configuration Guide 587
Optionally a description can also be defined.
The following example displays an IPv4 address prefix list configuration and its usage in an
IPv4 filter policy:
*A:ala-48>config>filter# info
----------------------------------------------
match-list
ip-prefix-list "IPv4PrefixBlacklist"
description "default IPv4 prefix blacklist"
prefix 10.0.0.0/21
prefix 10.254.0.0/24
exit
exit
ip-filter 10
scope template
filter-name "IPv4PrefixBlacklistFilter"
entry 10
match
src-ip ip-prefix-list IPv4PrefixBlacklist
exit
action drop
exit
exit
---------------------------------------------
Applying Filter Policies
Filter policies can be associated with the following entities:
Table 49: Applying Filter Policies
IP Filter Policies MAC Filter Policies
Epipe SAP, spoke SDP Epipe SAP, spoke SDP
Fpipe SAP, spoke SDP N/A
IES interface SAP N/A
Ipipe SAP, spoke SDP N/A
VPLS mesh SDP, spoke SDP, SAP VPLS mesh SDP, spoke SDP, SAP
VPRN interface SAP, spoke SDP N/A