Show, Monitor, Clear, and Debug Command Reference
464 Router Configuration Guide
Parameters interface ip-int-name — Clears the VRRP statistics for all VRRP instances on the specified IP
interface.
vrid virtual-router-id — Clears the VRRP statistics for the specified VRRP instance on the IP
interface.
Default All VRRP instances on the IP interface.
Values 1 to 255
policy [vrrp-policy-id] — Clears VRRP statistics for all or the specified VRRP priority control
policy.
Default All VRRP policies.
Values 1 to 9999
ipv6 — Clears IPv6 statistics for the specified interface.
Debug Commands
The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
events
Syntax events
events interface ip-int-name [vrid virtual-router-id]
events interface ip-int-name vrid virtual-router-id ipv6
no events
no events interface ip-int-name vrid virtual-router-id ipv6
no events interface ip-int-name [vrid virtual-router-id]
Context debug>router>vrrp
Description This command enables debugging for VRRP events.
The no form of the command disables debugging.
Parameters ip-int-name — Displays the specified interface name.
vrid virtual-router-id — Displays the specified VRID.
ipv6 — Debugs the specified IPv6 VRRP interface.
packets
Syntax packets interface ip-int-name [vrid virtual-router-id]
packets
To Next Page
Loading...
