Alcatel-Lucent 7450 - Copy Filter Commands

Filter Configuration Command Reference
518 Router Configuration Guide
— timeout seconds
—no timeout
— [no] unicast-rt-test
— url-test test-name [create]
—no url-test test-name
— drop-count consecutive-failures [hold-down seconds]
—no drop-count
— interval seconds
—no interval
— return-code return-code-1 [return-code-2] [disable | lower-priority
priority | raise-priority priority]
—no return-code return-code-1 [return-code-2]
— timeout seconds
—no timeout
— url url-string [http-version version-string]
—no url
— router router-instance
— router service-name service-name
—no router
— [no]
shutdown
— sticky-dest hold-time-up
— sticky-dest no-hold-time-up
—no sticky-dest
Copy Filter Commands
config
—filter
— copy
— ip-filter src-filter-id [src-entry src-entry-id] to dst-filter-id [dst-entry dst-entry-id]
[overwrite]
— mac-filter src-filter-id [src-entry src-entry-id] to dst-filter-id [dst-entry dst-entry-id]
[overwrite]
— ipv6-filter src-filter-id [src-entry src-entry-id] to dst-filter-id [dst-entry dst-entry-id]
[overwrite]