Alcatel-Lucent 7450 - Configuring an Autonomous System

IP Router Configuration
Router Configuration Guide 83
A:ALA-B>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
shutdown
address 10.0.0.103/24
port 1/1/1
exit
autonomous-system 100
confederation 2002 members 200 300 400
router-id 10.10.10.103
#------------------------------------------
A:ALA-B>config>router#
Configuring an Autonomous System
Configuring an autonomous system is optional. Use the following CLI syntax to configure an
autonomous system:
CLI Syntax: config>router
autonomous-system as-number
The following displays an autonomous system configuration example:
A;ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 100
router-id 10.10.10.103
#------------------------------------------
A:ALA-A>config>router#