Hybrid OpenFlow Switch
Router Configuration Guide 679
Command Descriptions
• Generic Commands
• Show Commands
• Debug Commands
Generic Commands
open-flow
Syntax open-flow
Context config
Description This command enables configuration content for OpenFlow Hybrid Switch compatibility.
The no form of the command removes the OpenFlow configuration from the context.
of-switch
Syntax [no] of-switch ofs-name
Context config>open-flow
Description This command creates an OpenFlow switch instance.
The no form of the command deletes the OpenFlow switch instance from the context.
Default no of-switch
Parameters string — Specifies the name of the OpenFlow switch instance, a string up to 32 characters.
aux-channel-enable
Syntax [no] aux-channel-enable
Context config>open-flow>of-switch
Description This command enables auxiliary connections for the given H-OFS instance. If enabled, the H-OFS
switch sets up a statistics auxiliary channel (Auxiliary ID 1) and a packet-in auxiliary channel
(Auxiliary ID 2) for the main connection to every configured OpenFlow controller.
The no form of this command disables auxiliary connections.
To Next Page
Loading...
