VRRP
Router Configuration Guide 461
Sample Output
A:ALA-48# show router vrrp statistics
===============================================================================
VRRP Global Statistics
===============================================================================
VR Id Errors : 0 Version Errors : 0
Checksum Errors : 0
===============================================================================
A:ALA-48#
Monitor Commands
The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
instance
Syntax instance interface interface-name vr-id virtual-router-id [ipv6] [interval seconds] [repeat
repeat] [absolute | rate]
Context monitor>router>vrrp
Description Monitor statistics for a VRRP instance.
Parameters interface-name — The name of the existing IP interface on which VRRP is configured.
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a
decimal integer.
interval seconds — Configures the interval for each display in seconds.
Values 3 to 60
Default 5 seconds
repeat repeat — Configures how many times the command is repeated.
Values 1 to 999
Default 10
Table 42: Show VRRP Statistics Output
Label Description
VR Id Errors Displays the number of virtual router ID errors.
Version Errors Displays the number of version errors.
Checksum Errors Displays the number of checksum errors.
To Next Page
Loading...
