Alcatel-Lucent 7450 - Redirect Policy Configuration Commands

Filter Policies
Router Configuration Guide 517
—no description
— [no] prefix ip-prefix/prefix-length
— ipv6-prefix-list ipv6-prefix-list-name [create]
—no ipv6-prefix-list ipv6-prefix-list-name
— [no] apply-path
— bgp-peers index group reg-exp neighbor reg-exp
—no bgp-peers index
— description description-string
—no description
— [no] prefix ipv6-prefix/prefix-length
— port-list port-list-name [create]
—no port-list port-list-name
— description description-string
—no description
— [no] port port number
— [no] port range start end
—no port
Redirect Policy Configuration Commands
config
—filter
— redirect-policy redirect-policy-name [create]
—no redirect-policy redirect-policy-name
— description description-string
—no description
— destination ip-address [create]
—no destination ip-address
— description description-string
—no description
— [no] ping-test
— drop-count consecutive-failures [hold-down seconds]
—no drop-count
— interval seconds
—no interval
— timeout seconds
—no timeout
— priority [priority]
—no priority
— [no] shutdown
— snmp-test test-name [create]
—no snmp-test test-name
— drop-count consecutive-failures [hold-down seconds]
—no drop-count
— interval seconds
—no interval
— oid oid-string community community-string
—no oid
— return-value return-value type return-type [disable | lower-priority
priority | raise-priority priority]
—no return-value return-value type return-type