Show, Clear, Monitor, and Debug Command Reference
600 Router Configuration Guide
Show Commands
show
—filter
— dhcp [filter-id]
— dhcp6 [filter-id]
— ip [filter-type filter-type]
— ip embedded [inactive]
— ip ip-filter-id embedded [inactive]
— ip ip-filter-id [detail]
— ip ip-filter-id associations
— ip ip-filter-id type entry-type
— ip ip-filter-id counters [type entry-type][detail]
— ip ip-filter-id entry entry-id [counters] [detail]
— ipv6 [filter-type filter-type]
— ipv6 embedded [inactive]
— ipv6 ipv6-filter-id embedded [inactive]
— ipv6
ipv6-filter-id [detail]
— ipv6 ipv6-filter-id associations
— ipv6 ipv6-filter-id type entry-type
— ipv6 ipv6-filter-id counters [type entry-type]
— ipv6 ipv6-filter-id entry entry-id [counters][detail]
— log [bindings]
— log log-id [match string]
— mac {mac-filter-id [entry entry-id] [association | counters]}
— match-list
— ip-prefix-list [prefix-list-name]
— ip-prefix-list prefix-list-name references
— ipv6-prefix-list [prefix-list-name]
— ipv6-prefix-list prefix-list-name references
— port-list [port-list-name]
— port-list
port-list-name references
— redirect-policy [redirect-policy-name {dest ip-address|associations}]
— system-filter [chained-to]
Clear Commands
clear
—filter
— ip filter-id [entry entry-id] [ingress | egress]
— ipv6 ipv6-filter-id [entry entry-id] [ingress | egress]
— log log-id
— mac mac-filter-id [entry entry-id] [ingress | egress]
Monitor Commands
monitor
To Next Page