VRRP
Router Configuration Guide 389
Figure 15: VRRP Configuration and Implementation Flow
Configuration Notes
This section describes VRRP configuration caveats.
General
• Creating and applying VRRP policies are optional.
• Backup command:
→ The backup IP address(es) must be on the same subnet. The backup addresses
explicitly define which IP addresses are in the VRRP advertisement message IP
address list.
ENABLE
START
CONFIGURE VRRP PRIORITY CONTROL POLICIES (optional)
CONFIGURE IES SERVICE
CONFIGURE ROUTER INTERFACE
CONFIGURE INTERFACE
CONFIGURE INTERFACE
SPECIFY ADDRESS, SECONDARY ADDRESS(ES) SPECIFY ADDRESS, SECONDARY ADDRESS(ES)
APPLY VRRP PRIORITY CONTROL POLICIES (optional)
SPECIFY BACKUP IP ADDRESS(ES)
CONFIGURE VRRP OWNER/NON-OWNER INSTANCE
CONFIGURE VRRP PARAMETERS
To Next Page
Loading...
