Alcatel-Lucent 7450 - Debug Commands

Filter Policies
Router Configuration Guide 647
Debug Commands
The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
cpm
Syntax cpm
Context tools>dump>filter>resources
Description This command displays information about filter resource utilization on the CPM, consumption by
filter-using services like TMS, OpenFlow, and the filters that use the most resources.
Output
Sample Output
*A:Dut-C>tools>dump>filter>resources># cpm
===========================================================================
Number of ACL filters defined on CPM
===========================================================================
Owner MAC IP IPv6 Total
---------------------------------------------------------------------------
Configuration 0 7 0 7
Host Common 0 2 0 2
Tms 0 1 1 2
Openflow 0 2 1 3
---------------------------------------------------------------------------
Total 0 14 4 18
===========================================================================
Available filters (except openflow): 16369
Available openflow filters: 16381
=============================================================================
Number of ACL filter entries / subentries defined on CPM
=============================================================================
Inserted by MAC IP IPv6 Total
-----------------------------------------------------------------------------
User configuration 0 21 1 22
0 21 1 22
Radius 0 0 0 0
0 0 0 0
Credit Control 0 0 0 0
0 0 0 0
Embedded 0 0 0 0
0 0 0 0
Radius shared host 0 2 0 2
0 2 0 2
Openflow 0 0 0 0
0 0 0 0
PCC-Rule 0 0 0 0