VRRP
Router Configuration Guide 463
Clear Commands
The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
interface
Syntax interface ip-int-name [vrid virtual-router-id]
interface ip-int-name vrid virtual-router-id ipv6
Context clear>router>vrrp
Description This command resets VRRP protocol instances on an IP interface.
Parameters ip-int-name — The IP interface to reset the VRRP protocol instances.
vrid vrid — Resets the VRRP protocol instance for the specified VRID on the IP interface.
Default All VRIDs on the IP interface.
Values 1 to 255
ipv6 — Clears IPv6 information for the specified interface.
statistics
Syntax statistics [policy policy-id]
Context clear>router>vrrp
Description This command enables the context to clear and reset VRRP entities.
Parameters policy policy-id — Clears statistics for the specified policy.
Values 1 to 9999
statistics
Syntax statistics interface interface-name [vrid virtual-router-id]
statistics
statistics interface interface-name vrid virtual-router-id ipv6
Context clear>router>vrrp
Description This command clears statistics for VRRP instances on an IP interface or VRRP priority control
policies.
To Next Page
Loading...
