IP Router Configuration Command Reference
88 Router Configuration Guide
Router Commands
config
— router [router-name]
— aggregate ip-prefix/ip-prefix-length [summary-only] [as-set] [aggregator as-number:ip-
address] [black-hole] [community comm-id] [description description]
— aggregate ip-prefix/ip-prefix-length [summary-only] [as-set] [aggregator as-number:ip-
address] [community comm-id] [indirect ip-address] [description description]
—no aggregate ip-prefix/ip-prefix-length
— autonomous-system autonomous-system
—no autonomous-system
— confederation confed-as-num members as-number [as-number...(up to 15 max)]
—no confederation [confed-as-num members as-number....
(up to 15 max)]
— ecmp max-ecmp-routes
—no ecmp
— fib-priority {high | standard}
— flowspec
— ip-filter-max-size {value | default}
— ipv6-filter-max-size {value | default}
— [no] icmp-tunneling
— [no] ignore-icmp-redirect
— [no] ip-fast-reroute
— [no] ldp-shortcut
— mc-maximum-routes number [log-only] [threshold threshold]
—no mc-maximum-routes
— mpls-labels
— bgp-labels-hold-timer seconds
—no bgp-labels-hold-timer
— static-label-range static-range
—no static-label-range
— sr-labels start-value end end-value
—no sr-labels
— mss-adj-group nat-group-id segment-size
segment-size
—no mss-adj-group
— multicast-info policy-name
—no multicast-info
— multicast-info
— description description-string
—no description
— origin-validation
— [no] rpki-session ip-address
— [no] connect-retryseconds
— [no] description string
— [no] local-address ip-address
— [no] port number
— [no] refresh-time seconds hold-time seconds
— [no] shutdown
— [no] stale-time seconds
— static-entry ip-prefix/prefix-length1-prefix-length2 origin-as as-number
[valid | invalid]
—no static-entry ip-prefix/prefix-length1-prefix-length2
— router-id
ip-address
—no router-id
To Next Page