IP Router Configuration
Router Configuration Guide 111
multicast-info
Syntax multicast-info-policy policy-name
no multicast-info-policy
Context configure>router
Description This command configures multicast information policy.
Parameters policy-name — Specifies the policy name.
Values 32 chars max
network-domains
Syntax network-domains
Context config>router
Description This command opens context for defining network-domains. This command is applicable only in the
base routing context.
description
Syntax [no] description string
Context config>router>network-domains>network-domain
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
Default no description
Parameters string — The description character string. Allowed values are any string up to 80 characters long
composed of printable, 7-bit ASCII characters. If the string contains special character (#, $,
space, etc.), the entire string must be enclosed within double quotes.
network-domain
Syntax network-domain network-domain-name [create]
no network-domain network-domain-name
Context config>router>network-domains
Description This command creates network-domains that can be associated with individual interfaces and SDPs.
Default network-domain “default”
To Next Page
Loading...
