Common Configuration Tasks
68 Router Configuration Guide
ingress
filter ip ip-filter-id
filter ipv6 ipv6-filter-id
port port-name
The following displays an IP configuration output showing interface information.
A:ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "system"
address 10.10.0.4/32
exit
interface "to-ALA-2"
address 10.10.24.4/24
port 1/1/1
egress
filter ip 10
exit
exit
...
#------------------------------------------
A:ALA-A>config>router#
To enable CPU protection:
CLI Syntax: config>router
interface interface-name
cpu-protection policy-id
CPU protection policies are configured in the config>sys>security>cpu-protection context.
See the System Management Guide.
Configuring IPv6 Parameters
IPv6 interfaces and associated routing protocols may only be configured on the following
systems:
• 7950 XRS systems.
• 7750 SR chassis systems in chassis mode c or d.
• 7750 SR-a chassis systems.
• 7750 SR-e chassis systems.
• 7450 ESS chassis running in mixed-mode, with IPv6 functionality limited to those
interfaces on slots with 7750 IOM3-XPs/IMMs (or later) line card.
• 7750 SR-c4/12.
To Next Page
Loading...
