Common Configuration Tasks
584 Router Configuration Guide
match
exit
action forward redirect-policy redirect1
exit
----------------------------------------------
A:ALA-7>config>filter>ip-filter#
Within a filter entry, you can also specify that traffic matching the associated IPv4 filter entry
is not sampled by cflowd if the IPv4 interface is set to cflowd interface mode. The following
displays an IPv4 filter entry configuration example:
A:ALA-7>config>filter>ip-filter# info
----------------------------------------------
description "filter-main"
scope exclusive
entry 10 create
description "no-91"
no filter-sample
no interface-disable-sample
match
exit
action forward redirect-policy redirect1
exit
----------------------------------------------
A:ALA-7>config>filter>ip-filter#
Creating an IPv6 Filter Policy
Configuring and applying IPv6 filter policies is optional. IPv6 Filter Policy must be
configured separately from IP (IPv4) filter policy. The configuration mimics IP Filter policy
configuration. Please see Creating an IPv4 Filter Policy.
Creating a MAC Filter Policy
Configuring and applying filter policies is optional. Each filter policy must have the
following:
• The filter policy type specified (MAC normal, MAC isid, MAC vid).
• A filter policy ID.
• A default action, either drop or forward.
• Filter policy scope, either exclusive or template.
• At least one filter entry, with a match criterion defined.
To Next Page
Loading...
